Leading-Quality Grinding Services in Melbourne

Concrete Grinding Melbourne

Concrete grinding is used across all sectors, for either preparation of the concrete in readiness for a fresh flooring type, or for polished concrete, prior to concrete sealing, for renovation works, or in industrial centres. Modern factories, warehouses and distribution centres rely for their efficiency on material handling equipment and other machinery being able to move freely around the floors. That requires floors to be of a suitable finish for hard wear and tear and properly preparing the concrete first, then choosing the appropriate finish will determine how fit for purpose your floor is.

The Need for Concrete Grinding in Melbourne

Using our concrete grinding services, you can ensure that all concrete floors are made good ready for your chosen finish when they need to be. We can, if required, resurface the concrete of a floor so it is more rough or more smooth, depending on the end result wanted. And we can do this quickly and efficiently with minimum disruption to your operation.

The Benefits of Concrete Grinding in Melbourne

An unsuitable or uneven concrete floor can be seriously detrimental to the efficient operation of any warehouse or similar industrial facility. Correcting the fault by concrete grinding can provide numerous benefits:

  • material handling equipment and other machinery can operate at full speed, increasing efficiency and productivity
  • reduced vibration caused by uneven surfaces will result in less down-time and lower maintenance costs
  • operators are less prone to fatigue and so will make fewer mistakes, improving health and safety performance and decreasing damage to stock
  • morale will be improved due to the more professional appearance of the work area.

Flooring Comparison Chart

DIFFERENT TYPES CARPET CERAMIC TILES VINYL OR LINOLEUM NATURAL STONE (SUCH AS SLATE OR MARBLE) POLISHED CONCRETE
Available in a wide spectrum of design options Unlimited
Longevity and performance
Ease of maintenance
Can radiate heat and store solar energy

Formulating and Carrying Out the Concrete Grinding Plan

We have extensive experience in concrete grinding means we have developed a proven method of doing the job properly. This involves a number of stages:

  • Undertaking a detailed assessment of the floor. This identifies the location of high and low areas as well as determining the general condition of the concrete floor.
  • Analysing the results of the assessment so that the problems areas are known and a detailed grinding plan can be established.
  • Choosing the best tools for the job. Hand tools may be used for small areas and edges while large floors require powerful grinding machines of the right size to get the job done. Each machine uses metal bonded diamonds to grind the concrete and the hardness of the concrete, how much concrete needs to be removed and the final finish required will the appropriate diamond. Thus, a coarse grit diamonds will be required for aggressive grinding followed by a fine grit to remove the coarser diamonds scratches and to finish off.
  • Grinding the floor. This will correct identified faults and result in the floor being levelled appropriately. Frequent checks will be made to ensure the grinding is in accordance with the plan and that the correct amount of concrete is being removed from the defined areas.

We use state of the art machines that get the job done quickly and efficiently so there’s minimal disruption to normal operations. It’s a low dust process although it will leave a small amount of residual dust (approximately 2%) that may require a general clean afterward depending on the environment.

The outcome will be a floor that’s well prepared, flat without imperfections and ready for the final steps, whether that be an industrial polished concrete, concrete sealing, epoxy coatings, or another flooring type.

For professional concrete grinding Melbourne wide, get in touch with Grind and Seal now.

things you must know before choosing your concrete polisheR GET MY FREE REPORT

Interior Grind and Seal Services in Melbourne that you can Depend on

If you are searching for reliable, consistent quality, look no further than Grind and Seal Melbourne for premier interior concrete grinding and sealing. We have been offering our services to both residential and commercial clients in Melbourne and Victoria since 1998, and we have the expertise and equipment to help you turn your dream floor into a reality.

READ MORE

Gallery

Be sure to take a look at our gallery for photos of some of our latest grind & seal and concrete flooring projects in the Melbourne and Victoria areas.

Interior Grind and Seal

FEATURED

Interior Grind and Seal

FEATURED

Interior Grind and Seal

FEATURED

Interior Grind and Seal

FEATURED

OFFERING ONLY THE BEST CONCRETE GRINDING AND SEALING SERVICES TO EACH AND EVERY ONE OF OUR CLIENTS IN MELBOURNE SINCE 1998.

Quick and Easy Interior Grind and Seal Quotes Just provide us with a few basic details of your project, such as the approximate size/square metres of your space and anything else you want to tell us about your grind and seal project.

How far along are you with your interior grind and seal?

  • Are you only just starting to explore indoor flooring options for your home or business?
  • Have you been looking for inspiration to renovate your indoor flooring and are trying to achieve a new look at an affordable rate?
  • Are you a Melbourne property owner and you want to increase your real estate’s value?
  • Do you have building plans for new premises and want to figure out the best flooring choice?

A list of suburbs we service
throughout Melbourne and surrounds

  • Yarra
  • Monash
  • Kingston
  • Glen Eira
  • Frankston
  • Port Phillip
  • Carrum
  • Berwick
  • Hampton
  • Prahran
  • Seaford
  • Braeside
  • Brighton
  • Hawthorn
  • Shoreham
  • St Kilda
  • Dandenong
  • Doncaster
  • Edithvale
  • Frankston
  • Camberwell
  • Cheltenham
  • Cranbourne
  • Heatherton
  • Mornington
  • Somerville
  • Elsternwick
  • Middle Park
  • Mount Eliza
  • Sandringham
  • Narre Warren

More reasons to choose Grind and Seal

Our Finishes Are Created Onsite
We Use Only Proven, Quality Products
you Can Rely On Us
experienced Flooring Specialists
Clear, Honest Communication
Our Finishes Can Be Installed On Timber, Concrete And Tiles
Customer Focused Values

Real Stories

Get in Touch with Us Today

Give us a call, send us an email, or fill out the easy quote form above for a free estimate for your interior grind and seal project today!

Quick Quote Form Tell us about the concrete you want polished, and we'll supply you with a pricing estimate plus some valuable information. It's helpful to include approximate floor size, new or old concrete, and suburb you are located in.

Melbourne’s Finest Interior Concrete Grinding and Sealing Providers

Commercial   *   Residential    *   Retail

Contact Us

Menu